Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1331)

Brocade Network Advisor IP User Manual 1277
53-1002947-01
IP Wired Products report
42
Admin Status Admin status information includes the following:
•
Name — The name of the product. Click the name of a product to launch the
Detailed Product Report.
•
Status — Whether the product is in normal operating mode or troubleshooting
mode.
•
Status Last Updated — When the last status update occurred.
•
Memo — A memo for the product.
•
Memo Last Updated — When the last memo update occurred.
Modules Module information shows what modules are installed on the product.
•
Unit/Slot Number — For products that support stacking, you can view the unit
number and slot number.
Slot — For products that do not support stacking, you can view the slot number.
•
Type — For wireless products, the type shows the model name of the product. For
wired products, the type of module installed in the slot.
•
Serial Number — The serial number of the module.
For wired products, the serial number cell may be blank.
•
Ports — The number of ports on the product.
The number of ports for ATM modules displays as zero.
•
Present — Whether the module is still installed on the product.
IP Addresses The IP addresses of each interface, including the virtual routing interface on wired
products. For Layer 2 switches, the management IP address displays in the IP Addresses
table with "management" in the Interface column.
•
Port — The port number.
•
IP Address — The IP address.
•
Subnet Mask — The subnet mask number.
•
VRF — The virtual routing interface.
Ethernet Ports This table contains the following information for each Ethernet interface on the product:
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Name — The name of the port.
•
MAC Address — The MAC address of the port.
•
Type — The type of port.
•
Speed (Mbps) — The speed of the port.
•
Duplex Mode — The duplex mode of the port.
•
Tag Mode — The tag mode of the port.
•
Role — The role (edge or fabric) of the port.
•
Profile Mode — Whether profile mode is enabled or disabled.
•
Active Profile — The active profile of the port.
•
Attached MAC — The MAC address of a device attached to the port.
FC Ports This table contains the following information for each FC interface on the product:
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Port WWN — The world wide name of the port.
•
Area ID/Port Index — The area identifier and port index of the port.
•
Type — The type of port.
•
Port Speed (Gb/s) — The speed of the port.
•
Trunked — Whether the port is trunked.
•
Trunk Index — The trunk index of the port.
TABLE 116 Detailed Cluster Report fields and components (Continued)