Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1075)

Brocade Network Advisor IP User Manual 1021
53-1002947-01
IP real-time performance monitoring
35
IP real-time performance monitoring
Real-time performance monitoring allows you to view a snapshot of current performance data. You
can enable real-time performance monitoring without configuring historical data collectors. The
data is not stored in the database. Performance monitoring allows you to define a data collector by
mapping a Management Information Base (MIB) object to a unit name (refer to
“MIB data
collectors” on page 1051).
Real-time performance measures are built-in expressions. The following measures are available:
Monitoring real-time performance
If no products have been selected for real-time performance monitoring, you can select products
and data collectors by taking the following steps.
1. Select Monitor > Performance > Real Time Graphs/Tables.
The Select Sources - Real Time Graphs/Tables dialog box displays, as shown in . Figure 390 on
page 1021.
FIGURE 390 Select Sources - Real Time Graphs / Tables dialog box
Device measures
• Power Allocation (NS)
• Power Allocation % (NS)
• CPU utilization
• Memory utilization
• Temperature
Port measures
• Optics
• Power Allocation (NS)
• Consumption (W)
• Power Consumption %
• Input and output utilization
• Throughput
• Input and output errors
• FC Port transmit and receive utilization (VDX only)
• FC Port transmit and receive in megabits per second (VDX
only)