Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 181
Brocade Network Advisor IP User Manual
127
53-1002947-01
Product group overview
5
•
Build Label
•
Location
•
Contact
•
Description
•
User_defined_property1 (up to 3)
8. Select one of the following from the Operator list.
•
Equals (valid for Regular Expression or Value type)
•
Not Equals (valid for Regular Expression or Value type)
•
Starts With (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Ends With (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Contains (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
•
Does not contain (only valid for Value type)
Not available if you select Status or Product Type from the Property list.
9. Enter a value or regular expression in the Value/Regular Expression cell.
This field is case sensitive.
If you selected Status from the Property list, the following predefined values are populated in
the Value/Regular Expression cell:
•
Reachable
•
Not Reachable
•
Down
•
Healthy
•
Marginal
•
Degraded Link
•
Unhealthy
If you selected Product Type from the Property list, the following predefined values are
populated in the Value/Regular Expression cell:
•
L2 Switch
•
Load Balancer
•
Router
•
Wireless Controller
•
Wireless Standalone AP
To fetch products that have an empty value for a property, select the operator Equals from the
Operator list and leave the Value/Regular Expression field blank.