Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 851)

Brocade Network Advisor IP User Manual 797
53-1002947-01
Configuration snapshots
25
 Re-sync — Occurs when a trap is generated by the device during a startup or running
configuration change, or when a user performs a manual resynchronization of the
device
For Network OS devices, Re-sync backup occurs after manual rediscovery of the VCS
cluster member device and when a CLI configuration deployment occurs on the
product.
 Manual — Occurs when a user clicks the Save Running/Startup Configuration button
 Scheduled — Occurs when obtained backup at the scheduled time
4. Perform one of the following actions:
• Click the Refresh button to update the network and retrieve the latest data from the
database.
• Click the View button to compare the contents of the latest configuration and the baseline
configuration. You can view only one configuration at a time.
• Click the Export button to export the currently viewed change tracking records to a .csv file.
The default file name is “Change_Tracking_Report.csv.”
5. Click OK to save the configuration.
6. Click Close to exit the dialog box.
Configuration snapshots
The Configuration Repository dialog box - Configuration Snapshots tab, shown in Figure 285 , allows
you to compare two configuration snapshots; for example, the pre-configuration and
post-configuration snapshots.
1. Click the IP tab.
2. Select Configure > Configuration > Configuration Repository.
3. Click the Configuration Snapshots tab.
The Configuration Snapshots tab displays, as shown in Figure 285 .