Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 67)

Brocade Network Advisor IP User Manual 13
53-1002947-01
Management server and client
1
49 2 TACACS+ Authentication port TCP TACACS+ server port for
authentication if you use
TACACS+ as an external
authentication Server–TACACS+
Server Yes
69 TFTP UDP File upload/download to
product Product-Server Yes
80 2 Management application HTTP server TCP Non-SSL HTTP/1.1 connector
port if you use secure
client-server communication.
You need this port for HTTP
redirection Client–Server Yes
80 1 Product HTTP server TCP Product non-SSL http port for
http and CAL communication if
you do not use secure
communication to the product Server–Product Yes
Product non-SSL http port for
http and CAL communication if
you do not use secure
communication to the product
and you do not use the
Management application
server proxy Client–Product Yes
161 2 SNMP port UDP Default SNMP port Server–Product Yes
162 2 SNMP Trap port UDP Default SNMP trap port Product-Server Yes
389 2 LDAP Authentication Server Port UDP
TCP LDAP server port for
authentication if you use LDAP
as an external authentication Server–LDAP
Server Yes
443 1,2 HTTPS server TCP HTTPS (HTTP over SSL) server
port if you use secure client -
server communication Client-Server Yes
443 2 HTTPS (HTTP over SSL) server
port if you use secure
communication to the product Server–Product Yes
443 HTTPS (HTTP over SSL) server
port if you use secure
communication to the product
and you do not use the
Management application
server proxy Client–Product Yes
443 2 HTTPS (HTTP over SSL) server
port if you use vCenter
discovery Server-vCenter
Server Yes
465 2 SMTP Server port for SSL TCP SMTP Server port for e-mail
communication if you use
e-mail notifications with SSL Server-SMTP
Server Yes
514 2 Syslog Port UDP Default Syslog Port Product–Server
Managed Host -
Server Yes
TABLE 5 Port usage and firewall requirements (Continued)
Port Number Ports Transport Description Communication Path Open in Firewall