Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 408
354
Brocade Network Advisor IP User Manual
53-1002947-01
Viewing MRP properties
10
•
Secondary Port — The secondary port of the device.
•
Secondary Port Active — The port number receiving RHPs.
•
Secondary Port State — The state (Pre-forwarding, Forwarding, Blocking, or Disabled) of
the secondary port.
•
Secondary Port Type — The secondary port type (Regular or Tunnel).
•
State — Whether MRP is enabled or disabled on the device.
•
State Changed — The number of MRP interface state changes that have occurred.
•
TC RHPs Received — The number of Topology Change RHPs received on the interface. A
Topology Change RHP indicates that the ring topology has changed.
•
VLAN ID — The VLAN ID or master VLAN ID in the topology group used by the ring.
3. Click Close on the MRP Properties dialog box.