Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1439)

Brocade Network Advisor IP User Manual 1385
53-1002947-01
CLI Templates
G
TABLE 51 Network OS – Delete Port Profiles
Feature Description CLI Commands
AMPP Removes the port profile. no port-profile $ activate
no port-profile $
TABLE 52 Network OS – Update ACL on Port Profile
Feature Description CLI Commands
AMPP Adds a security profile to a port
profile. no port-profile $ activate
port-profile $
security-profile
mac access-group $ in
exit
port-profile $ activate
TABLE 53 Network OS – Update QoS on Port Profile
Feature Description CLI Commands
AMPP Adds a QoS profile to a port profile. no port-profile $ activate
port-profile $
qos-profile
qos cos-mutation $
exit
port-profile $ activate
TABLE 54 Network OS – Update VLAN on Port Profile
Feature Description CLI Commands
AMPP Adds a VLAN profile to a port profile. no port-profile $ activate
port-profile $
vlan-profile
switchport
switchport mode trunk
switchport trunk allowed vlan all
switchport trunk allowed vlan remove
$
switchport trunk native-vlan $
exit
port-profile $ activate
TABLE 55 Private VLAN – Configure VLAN as a PVLAN
Feature Description CLI Commands
VLAN To configure PVLAN type (Isolated,
community or primary) to a VLAN. interface vlan $private-vlan isolated
private-vlan community
private-vlan primary