Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1349)

Brocade Network Advisor IP User Manual 1295
53-1002947-01
Reports Template Manager overview
42
Ports Tx/Rx Ratio report
The Ports Tx/Rx Ratio report ( Figure 508 ) details the ratio between transmitted and received data
on a port or group of ports for the specified parameters.
FIGURE 508 Ports Tx/Rx Ratio report
Modules Module information shows what modules are installed on the product.
•
Slot Number — For products that do not support stacking, you can view the slot
number.
•
Type — The type of module installed in the slot.
•
Serial Number — The serial number of the module. For wired products, the serial
number cell may be blank.
•
Ports — The number of ports on the product. The number of ports for ATM modules
displays as zero.
•
Present — Whether the module is installed on the product.
Ethernet Ports This table contains the following information for each Ethernet interface on the product:
•
Identifier — The port identifier.
•
Port Name — The port name.
•
Type — The type of port.
•
Speed (Mbps) — The speed of the port.
•
MAC Address — The MAC address of the port.
•
Name — The name of the port.
•
Tag Mode — The tag mode of the port.
•
Duplex Mode — The duplex mode of the port.
TABLE 129 Detailed Cluster Report fields and components (Continued)