Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1417)

Brocade Network Advisor IP User Manual 1363
53-1002947-01
IP device properties
E
4. Click OK to close the dialog box.
SFP/Port Optics Click to view the SFP/Port Optic information:
•
TX Power — The power transmitted to the SFP in dBm and uWatts.
•
RX Power — The power received from the port in dBm and uWatts.
•
Transceiver Temp (C) — The temperature of the SFP transceiver.
•
Voltage (mVolts) — The voltage across the port in mVolts.
•
Transceiver Current (mAmps) — The laser bias current value in
mAmps.
•
Powered on Years (Hours) — The powered on time in years and
hours for 16 Gbps capable ports. Empty for unsupported ports.
•
Requires a 16 Gbps capable port running Fabric OS 7.0 or later.
•
FC Speed (GB/s) (Fabric OS 7.0 or later) — The FC port speed; for
example, 4 Gbps.
•
FC Speed (MB/s) (Fabric OS 6.4 or earlier) — The FC port speed; for
example, 400 Mbps.
•
Distance — The length of the fiber optic cable.
•
Vendor — The vendor of the SFP.
•
Vendor OUI — The vendor’s organizational unique identifier (OUI).
•
Vendor PN — The part number of the SFP.
•
Vendor Rev — The revision number of the SFP.
•
Serial # — The serial number of the SFP.
•
Data Code — The data code.
•
Media Form Factor — The type of media for the transceiver; for
example, single mode.
•
Connector — The type of port connector.
•
Wave Length — The wave length.
•
Encoding — Displays how the fiber optic cable is encoded.
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 1367.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1367.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1368.
Field/Component Description