Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 921)

Brocade Network Advisor IP User Manual 867
53-1002947-01
VLAN Manager
29
Displaying VLANs in the VLAN view
The VLAN View tab displays all the VLANs discovered on the network and lists them by VLAN IDs
(
Figure 312 ).
FIGURE 312 VLAN Manager dialog box - VLAN View tab
To view the VLANs or products in the VLAN View tab, complete the following steps.
1. Click the VLAN View tab in the VLAN Manager dialog box.
2. Expand the folder under the VLAN View tab, then double-click a super-aggregated VLAN to
display its port VLANs or Products.
VLANs are listed by their topologically distinct broadcast domains. A VLAN that is listed several
times means that the products on which the VLAN has been configured cannot communicate
with each other. Either they are not physically connected or FDP or LLDP is not enabled on
these products. If FDP or LLDP is enabled, then each VLAN lists the products in that broadcast
domain.