Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 467
Brocade Network Advisor IP User Manual
413
53-1002947-01
Configuration repository management
14
The Saved Switch Configurations table displays the following information.
•
Keep check box — Select to keep the associated configuration past the defined age limit.
The configuration will be kept until it is manually deleted, or until the Keep check box is
cleared to enable the age limit again
•
Backup Date/Time — The date and time the last backup occurred. This is the backup that
will be restored.
•
Fabric Name — The name of the fabric to which the selected switch belongs.
•
Name — The name of the switch that will be restored.
•
Configuration Type — The type of configuration for the switch (FC, DCB-running, or
DCB-startup).
•
IP Address — The IP address of the switch that will be restored.
•
WWN — The world wide name of the switch that will be restored.
•
Discovered — Whether the switch is discovered or not.
Yes — The switch is discovered.
No — The switch was deleted from discovery.
•
Comments — Comments regarding the switch.
2. Select the configuration you want to restore, and click Restore.
The configuration is downloaded to the device. If necessary, the restoration process prompts
you to disable and reboot the device before the configuration begins. This lets you determine
whether the configuration backup should be performed immediately or at a later time.
If you confirm the restoration, the entire configuration is restored; you cannot perform selective
download for specific configuration sections.
You can also perform the following functions from this dialog box:
•
“Keeping a copy past the defined age limit”
•
“Viewing configuration file content”
•
•
•