Editing cidr subnet, Addresses, Editing subnet – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 134: Editing ip, Editing cidr subnet addresses, Editing subnet addresses, Editing ip addresses
80
Brocade Network Advisor IP User Manual
53-1002947-01
IP discovery profiles
4
8. To edit an excluded address range, select the address range you want to edit in the Excluded IP
Addresses list.
9. Click the left arrow button to display the address range details in the bottom Add/Edit IP
Addresses area.
10. Edit the excluded address range by choosing one of the following options:
•
To edit the excluded addresses using the CIDR subnet format, refer to
•
To edit the excluded addresses using the subnet format, refer to
•
To edit the excluded addresses using the address range format, refer to
11. Click the right arrow button to add the address range to the Excluded IP Addresses list.
12. Click Apply to save your changes.
13. Click Close to close the Discover Setup - IP dialog box.
14. Click Yes on the confirmation message.
Editing CIDR subnet addresses
To edit the CIDR subnet address (IPv4 and IPv6) range, complete the following steps.
1. Change the IP address in the IP Address field.
2. Change the number of subnet mask bits in the Subnet Mask Bits field.
For IPv4, the number of subnet mask bits is from 0 through 32.
For IPv6, the number of subnet mask bits is from 0 through 128.
3. To finish editing the address ranges, return to
Editing subnet addresses
To edit the subnet address (IPv4 only) range, complete the following steps.
1. Change the IP address in the IP Address field.
2. Change the subnet mask in the Subnet Mask field.
3. To finish editing the address ranges, return to
Editing IP addresses
To edit the IP address range (IPv4 and IPv6), complete the following steps.
1. Change the first IP address in the range in the first IP Address field.
2. Change the last IP address in the range in the second IP Address field.