Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1088)

1034 Brocade Network Advisor IP User Manual
53-1002947-01
IP historical performance monitoring
35
Editing system collectors
Subject to the following restrictions, you can edit system collectors using the Data Collector wizard
(refer to
“Adding or editing a historical data collector” on page 1035).
You can modify the following attributes:
• Enable/disable settings - Collector Basics page
• Target selection - Select Source page
• Threshold and Rearm settings - Threshold and Rearm page
You cannot modify the following attributes:
• Name - Collector Basics page
• Device or port level - Collector Basics page
• Polling interval - Collector Basics page
• Schedule setting - Collector Basics page
• MIB selection - MIB Object page
• Expression selection - Expression page
• MIB index - MIB Index page
NOTE
The MIB index page for system collectors will not show since you cannot configure the MIB
index for system collectors.
Displaying historical data collectors
Select Monitor > Performance > Historical Data Collectors to display configured historical data
collectors.
FIGURE 395 Historical Data Collectors dialog box
All configured data collectors are listed, showing the following information:
• Name - The name of the data collector.