Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1176)

1122 Brocade Network Advisor IP User Manual
53-1002947-01
Schedule PoE power deployment
37
Viewing the configured ports for a power deployment schedule
To view all ports to which a power deployment schedule is configured, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select PoE Products from the View list.
3. Select a port, product, port group, or product group in the PoE Product list and click Schedule
PoE On/Off.
The Schedule PoE On/Off dialog box displays.
4. Select the schedule for which you want to view the configured ports from the All Schedules list.
5. Click Show Ports.
The Scheduled Ports [Schedule_Name] dialog box displays.
FIGURE 445 Scheduled Ports [ Schedule_Name ] dialog box
6. Review the following information:
• Product — The name of the Product.
• Port — The port identifier.
• Name — The port name.
• Status — The Ethernet status of the port. Values include: Up and Down.
• State — The Ethernet state of the port. Values include: Enabled and Disabled.
• Admin State — The PoE administrative state of the port. Values include: On (enabled) and
Off (disabled).
• Oper. State — The PoE operational state of a port. Values include: On (connected to a
powered device) and Off (not connected to a powered device).
The administrative state must be On for operational state to be On.
• Allocation (W) — The amount of allocated power to the port in Watts.
• Consumption (W) — The power consumed by the device connected to the port in Watts.
• Consumption % — The power consumed as a percentage of allocated power.