Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1419)

Brocade Network Advisor IP User Manual 1365
53-1002947-01
Host properties
E
Class of Service The class of the port; for example, Class-2 or Class-3.
Switch The name of the switch.
Fabric The name of the Fabric.
VM Port Name The port name of the virtual machine associated with the host.
Preboot Created Indicates whether preboot was created on the virtual port.
PCI Function Index The PCI function number associated with the physical port.
Fabric Assigned Address The state (enabled or disabled) of the fabric assigned address for
the adapter.
WWN Source The source of the world wide name. Options include:
Fabric — The WWN is assigned from the fabric. The fabric assigned
address must be enabled.
Factory — The WWN is assigned at the factory.
Configuration
Configured State Indicates whether the port is enabled or disabled.
Max Bandwidth The maximum allowable bandwidth output for the selected port.
Operating State Indicates whether the port is online or offline.
Configured Speed The configured port speed.
Operating Speed The speed at which the port is operating.
Max Speed Supported The maximum speed that is supported on the port. For the FC port,
the maximum speed is 8 Gbps.
Configured Topology The configured topology setting: auto, point-to-point, or loop.
Operating Topology The operating topology setting: auto, point-to-point, or loop.
Boot over SAN Indicates whether boot over SAN is enabled.
Receive BB Credits The number of buffer credits received.
Transmit BB Credits The number of buffer credits transmitted.
IOC ID The IO Controller identifier.
Frame Field Size The frame size, in bytes, of the port.
Hardware Path The hardware path of the HBA.
Virtual Port Count The number of virtual ports associated with the HBA.
Operating State Displays details about the state of the following operating
parameters:
•
Beacon State
•
Link Beacon State
•
MPIO Mode State
•
Path Time Out
•
Logging Level
•
Target Rate Limit
•
Default Rate Limit
FC-SP
Authentication Indicates whether FC-SP authentication is enabled or disabled.
TABLE 31 Adapter port properties (Continued)
Field Description