Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1095)

Brocade Network Advisor IP User Manual 1041
53-1002947-01
IP historical performance monitoring
35
19. Click Next on the MIB Index dialog box.
The Threshold & Rearm dialog box displays.
FIGURE 401 Data Collector wizard Threshold & Rearm dialog box
This dialog box allows you to establish a a threshold value that triggers a trap message when
the threshold is met, and to establish conditions for repeating threshold check and trap
messages.
20. Select Enable threshold and rearm events to enable the Threshold and Rearm selectors.
21. Select the Fixed Threshold value and assign a Threshold Trap Severity level.
22. Select the Fixed Rearm value and assign a Rearm Trap Severity level. If the Fixed Rearm value
is the exact value used to trigger rearming (repeating the threshold check and trap message),
select Absolute. If the Fixed Rearm value is expressed as a percentage of the threshold value,
select Percent of threshold.
23. This is the last dialog box of the Data Collector wizard. Click Finish to accept your entries.