Searching for a device by name, Searching for a device by wwn – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 209
Brocade Network Advisor IP User Manual
155
53-1002947-01
Name settings
6
To import names, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Click Import.
The Import Files dialog displays.
3. Browse to the import (.csv) file location.
4. Select the file and click Import.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Searching for a device by name
You can search for objects (switch, fabric, product, ports, or N Ports) by name. To search for a name
in the Connectivity Map, refer to
To search by name, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays.
2. Select All Names from the Display list.
3. Select Name from the Scope list.
4. Enter the name you want to search for in the Search field.
You can search on partial names.
NOTE
To search for a device, the device must be discovered and display in the topology.
5. Click Search.
All devices with the specified name (or partial name) are highlighted in the Display table. You
may need to scroll to see all highlighted names.
If the search finds no devices, a ‘no item found’ message displays.
6. Click OK to close the Configure Names dialog box.
Searching for a device by WWN
You can search for objects (switch, fabric, product, ports, or N Ports) by WWN (world wide name). To
search for a WWN in the Connectivity Map, refer to
To search by WWN, complete the following steps.
HBA port
256
Others names
128
Device
Character limit