Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1162)

1108 Brocade Network Advisor IP User Manual
53-1002947-01
Data monitoring
37
FIGURE 436 Attached Devices tab of the Properties dialog box
4. Review the details in the Attached Devices tab:
• POE Port Count — The number of PoE ports, that have power devices which support LLDP,
connected to the selected device.
• System name — The system name of the connected device.
• System capabilities — The system capabilities enabled on the remote system.
• Enabled capabilties — The system capabilities enabled on the connected device.
• Device Type — The type of Power-via-MDI (Power over Ethernet) on the remote device.
• Power Source — The type of Power Source on the remote device.
• Power Priority — The priority required by the powered device (PD) connected remotely to
the port.
• Power Value — The available power (in Watts) from the Power Sourcing Equipment (PSE)
through the port on the remote device.
• Application Type — The primary function of the application for the policy on the connected
device.
• Policy Flags — Indicates whether the network policy for the application type is known, as
well as whether the application is using a tagged VLAN.
• VLAN ID — The extension of the VLAN Identifier for the remote system connected to the
port.
• L2 Priority — The 802.1p priority associated with the remote system connected to the port.
• DSCP Value — The Differentiated Service Code Point (DSCP), as defined in IETF RFC 2474
and RFC 2475, associated with the remote system connected to the port.
• Med Hardware revision — The hardware revision on the connected device.
• Med Software revision — The software revision on the connected device.