Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 303)

Brocade Network Advisor IP User Manual 249
53-1002947-01
Performance monitors
8
Top Port C3 Discards monitor
The Top Port C3 Discards monitor ( Figure 93 ) displays the top ports with Class 3 frames discarded
in a table. There are four port widgets: All, ISL, Initiator, and Target.
FIGURE 93 Top Port C3 Discards monitor
The Top Port C3 Discards monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• C3 Discards/sec — The number (error rate) of Class 3 discard errors per second for the
duration specified in the monitor.
• C3 Discards — The number (error count) of Class 3 discard errors for the duration specified in
the monitor.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.