Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 563)

Brocade Network Advisor IP User Manual 509
53-1002947-01
Bulk port configuration
17
Configuring host adapter ports
To create, edit, duplicate, or delete port configurations, complete the following steps.
Select Host > Adapter Ports from the Configure menu.
The Configure Host Adapter Ports dialog box, shown in Figure 180 , displays.
FIGURE 180 Configure Host Adapter Ports dialog box
Adding a port configuration
The Add Port Configuration dialog box allows you to create a maximum of 50 customized port
configurations which you can then select and assign to ports.
1. Click Add on the Configure Host Adapter Ports dialog box.
The Add Port Configuration dialog box, shown in Figure 181 , displays.