Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 625)

Brocade Network Advisor IP User Manual 571
53-1002947-01
Network OS switches in VCS mode
18
Network OS switches in VCS mode
For a Network OS switch in VCS mode or standalone mode, you can use the management
application to perform the following tasks:
• View Network OS switches, ports, LAGs, and vLAGs and their basic configuration details and
detailed DCB configurations.
• Enable and disable ports, LAGs, and vLAGs.
• View real-time performance graphs.
• View historical graphs and reports.
• View profiled port, LAG, and vLAG configurations.
• View the list of virtual FCoE ports.
• Enable, disable, and view Connected End Device details for the listed virtual FCoE ports.
• Launch the VLAN Manager.
• Launch the Access Control List (ACL) Manager.
NOTE
Network OS switches in standalone mode do not support FCoE login group management or virtual
FCoE port management.
NOTE
Network OS switches in VCS mode do not support FCoE login group management.
Supported VCS platforms
The following switches are supported in a virtual fabric switching environment:
• VDX 2730 10 GbE connection blade for the Fujitsu PRIMERGY BX900 and BX400 Blade
Servers
• VDX 6710
• VDX 6720-24
• VDX 6720-60
• VDX 6730-32
• VDX 6730-76
• VDX 6740
• VDX 6740T
• VDX 8770-4
• VDX 8770-8