Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1410)

1356 Brocade Network Advisor IP User Manual
53-1002947-01
IP device properties
E
4. Click OK to close the dialog box.
Viewing VCS fabric properties
To view properties for a VCS fabric, complete the following steps.
1. Select Ethernet Fabrics from the view list on the Product List toolbar.
2. Right-click the VCS fabric in the Product List and select Properties.
The Fabric_Name Properties dialog box displays.
3. Review the device and port properties.
Connected AP count Number of APs connected to the controller or switch.
Managed AP count Only applicable to the selected controller. Number of APs that the
selected controller manages.
Name The device name used to identify AP.
Device MAC The AP device MAC.
Model The model of the AP.
Serial Number The serial number of the AP.
Firmware version The firmware level of the AP.
Status IP address of the controller which manages the AP. Also displays the port
number if the AP is directly connected.
Controller \ Port IP address of the controller or switch connected to the AP. Also displays
the port number if the AP is directly connected.
Connected switch \ Port AP profile name.
Profile Name The RF domain name set for the AP.
RF Domain Name Location set for the AP.
Location Contact set for the AP.
Contact The time zone set for the AP.
Time Zone The country set for the AP.
Country The VLAN for control traffic set for the AP.
VLAN for Control Traffic The number of wireless clients or stations connected or associated to
the AP.
Client count The AP device MAC.
Field/Component Description
Properties tab Select to display information about the fabric.
Detailed Report button Click to launch the detailed cluster report.
Name The name of the fabric.
Alias The alias name. This is an editable field.
Host Name The host name. associated with the fabric.
Field/Component Description