Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1242)

1188 Brocade Network Advisor IP User Manual
53-1002947-01
SNMP traps
39
FIGURE 463 SNMP Trap Forwarding dialog box
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
To add a trap destination, complete the following steps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
The SNMP Trap Forwarding dialog box, shown in Figure 463 , displays.
2. Select the Enable trap forwarding check box.
3. Click Add in the Destinations area of the SNMP Trap Forwarding dialog box.
The Add Trap Destination dialog box, shown in Figure 464 , displays.