Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 1033)

Brocade Network Advisor IP User Manual 979
53-1002947-01
Controller configuration
32
Controller configuration
Once policies, sites, and zones are configured, you can assign and deploy a policy to a ServerIron
ADX product that is the GSLB controller.
The Controller Configuration tab on the GSLB dialog box allows you to assign and deploy a policy to
a ServerIron product that is the GSLB controller, after policies, sites, and zones are configured.
NOTE
All configuration options on the Controller Configuration tab are deployed to the selected GSLB
controller. To site ServerIron ADX products, however, only the GSLB Communication Port and Enable
Logging options are deployed.
1. Select Configure > Application Delivery > GSLB.
2. Click the Controller Configuration tab to view the controller definitions that have been defined
for the system.
The Controller Configuration tab displays.
3. Perform one of the following tasks:
a. Click Add to launch the Controller Configuration dialog box, which you use to deploy a
policy to a GSLB ServerIron ADX product that is the GSLB controller.
b. Select an existing controller configuration and click Edit to modify an existing controller
definition.
c. Select an existing controller configuration and click Duplicate to create a controller
configuration by copying an existing one.
d. Select an existing controller configuration and click Delete to remove it from the Controller
Configuration list.
e. Click Deploy to deploy the selected controller configuration from the list.
NOTE
All configuration options on the Controller Configuration tab are deployed to the selected GSLB
controller, but only the GSLB Communication Port and Enable Logging parameters are
deployed to site GSLB ServerIron ADX products.