Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 329)

Brocade Network Advisor IP User Manual 275
53-1002947-01
User-defined performance monitors
8
• Max — The maximum value of the measure in the specified time range.
• Fabric — The fabric to which the device belongs.
• Product Type — The type of product (for example, switch).
• State — The product state (for example, Offline).
• Status — The product status (for example, Reachable).
• Tag — The product tag.
• Serial # — The serial number of the product.
• Model — The product model.
• Port Count — The number of ports on the product.
• Firmware — The firmware level running on the product.
• Location — The location of the product.
• Contact — A contact name for the product.
• Refreshed — The time of the last update for the monitor.
To configure a product performance monitor, refer to “Configuring a user-defined product
performance monitor” on page 279.
Accessing additional data from top or bottom product monitors
In a Top N or Bottom N monitor, double-click a row or right-click a row and select Show Graph/Table
to navigate to the Historical Graphs/Tables dialog box for the selected measures. For more
information, refer to
“Performance Data” on page 1009.
Top or bottom port performance monitors
The top or bottom port performance monitors ( Figure 110 ) display the top or bottom number of
ports (for example, bottom 10 ports) for the selected measure in a table.
FIGURE 110 Top or bottom port performance monitor example