Dynamic product groups, Duplicating a static product group – Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 179
Brocade Network Advisor IP User Manual
125
53-1002947-01
Product group overview
5
Duplicating a static product group
To duplicate a product group, complete the following steps.
1. Select Network Objects from the view list on the Product List toolbar.
2. Right-click the product group you want to duplicate in the Product List and select Duplicate
Group.
The Add Product Group dialog box displays.
3. Edit the name for the product group in the Name field.
4. Edit the description for the product group in the Description field.
5. Select the Topology Display Enable check box to display the product group in the L2 Topology
view.
6. Add products to the group by selecting the product in the Available Products list and clicking
the right arrow button.
NOTE
You can add a standalone VDX product or a VCS fabric to a user-defined Product Group;
however, the VCS fabric members are not included with the group.
The selected products move from the Available Products list to the Selected Products list.
7. Remove products from the group by selecting the product in the Selected Products list and
clicking the left arrow button.
The selected products move from the Selected Products list to the Available Products list.
8. Click OK.
The duplicated group displays in the User-Defined Groups folder of the Product list.
Dynamic product groups
You can define a dynamic product group using the following product attributes:
•
Name — The name of the product.
•
IP Address — The IP address (IPv4 or IPv6 format) of the product.
•
Product Type — The type of product.
•
Serial # — The serial number of the product.
•
Status — The status for the product and the port.
•
Vendor — The name of the product’s vendor
•
Model — The model number of the product.
•
Firmware — The firmware version of the product.
•
Build Label — The firmware build number.
•
Location — The physical location of the product.
•
Contact — The name of the person or group you should contact about the product.
•
Description — The description of the product.
•
User_defined_property1 (up to 3) — A user-defined product property value. You can create up
to 3 user-defined properties (refer to