Brocade Network Advisor IP User Manual v12.1.0 - Manual (Page 165)

Brocade Network Advisor IP User Manual 111
53-1002947-01
Host discovery
4
Rediscovering a previously discovered fabric
To return a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to return to active discovery in the Previously Discovered Addresses
table.
3. Click Discover.
4. Click OK on the confirmation message.
The rediscovered host displays in the Discovered Hosts table.
5. Click Close on the Discover Host Adapters dialog box.
Deleting a host adapter from discovery
To delete a host permanently from discovery, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the host you want to delete permanently from discovery in the Previously Discovered
Addresses table.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Host Adapters dialog box.
Viewing the host discovery state
The Management application enables you to view device discovery status through the Discover
Host Adapters dialog box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Right-click the Hosts node select Expand All to show all devices.
The Name field displays the discovery status icons in front of the device name. The following
table illustrates and describes the icons that indicate the current status of the discovered
devices.