Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 1407
Brocade Network Advisor IP User Manual
1353
53-1002947-01
IP device properties
E
2. Right-click the device in the Product List and select Properties.
The Device_Name Properties dialog box displays.
3. Review the device and port properties.
To add user-defined property labels, refer to
Fields containing a green triangle ( ) in the lower right corner are editable.
NOTE
Some fields are not available for all products.
Field/Component
Description
Properties tab
Select to display information about the device.
Detailed Report button
Click to launch the detailed product report.
Name
The name of the product.
Alias
The alias.
Host Name
The host name.
System Name
The system name.
IP Address
The IP address (IPv4 or IPv6 format) of the product.
System OID
The system's object identifier.
Product Type
The type of device.
VCS Mode
Whether or not the device is in VCS mode.
VCS ID
The VCS ID number for the fabric.
Note Count
The number of nodes in the fabric.
Principal Switch
The identifier of the principal switch.
Config Mode
The configuration mode.
Device Type
The type of device.
Serial #
The serial number of the product.
Status
The status for the product and the port.
Admin Status
The admin status of the product. Options include:
Normal mode
Troubleshooting mode
Memo
Additional information about the product.
Vendor
The name of the product’s vendor.
Model
The model number of the product.
Port Count
The number of ports on the product.
Firmware
The firmware version of the product.
Build Label
The firmware build number.
FDMI Serial Number
The serial number of the FDMI.
FDMI Firmware
The FDMI firmware version and build number.
FDMI Driver version
The FDMI driver version.