Brocade Network Advisor IP User Manual v12.1.0 User Manual
Page 1562
1508
Brocade Network Advisor IP User Manual
53-1002947-01
Database tables and fields
I
HOP_LIMIT
Represents the limit for the number of hops the LSP
can traverse. Accepted range is 0 - 255.
num
(3,0)
IS_FACILITY_BACKUP
Specifies whether the request for Facility backup is
enabled or not. If the FRR mode is facility then this
value will be 1. 0 otherwise.
num
(1,0)
SETUP_PRIORITY
The setup priority for MPLS Fast Reroute.Allowed range
between 0-7.
num
(1,0)
HOLD_PRIORITY
'The hold priority for MPLS Fast Reroute. Allowed range
between 0-7.
num
(1,0)
MPLS_LSP_DB_ID
Database ID of the MPLS_RSVP_LSP instance which
these reroute parameters associated with.
int
TABLE 297
MPLS_RSVP_LSP_PARAMETERS
Field
Definition
Format
Size
MPLS_RSVP_LSP_PARAMETERS_D
B_ID
Unique database generated identifier.
int
IS_ADAPTIVE
Indicates if the LSP supports adaptive mechanism or
not. Non Adaptive-0, Adaptive-1.
num
(1,0)
BFD_TRANSMIT
This object specifies the minimum interval, in
milliseconds, that the local system would like to use
when transmitting The Bidirectional Forwarding
Detection(BFD) Control packets. Accepts a range of
50-30000.
int
BFD_RECEIVE
This object specifies the minimum interval, in
milliseconds, between received Bidirectional
Forwarding Detection (BFD) Control packets the local
system is capable of supporting. Accepts a range of
50-30000.
int
BFD_MULTIPLIER
The Bidirectional Forwarding Detect time multiplier.
Accepts a range of 3-50.
int
COS
The Class of Service for this LSP. Allowed range is 0-7
and 255. 255 means COS is not explicitly configured.
smallint
HOP_LIMIT
Represents the limit for the number of hops the LSP
can traverse. Accepted range is 0-255.
num
(3,0)
IS_CSPF
Specifies whether the Constrained Shortest Path First
(CSPF) calculation is enabled. Possible values are
Disabled-0, Enabled-1.
num
(1,0)
MTU
Specifies the Maximum IP Packet Size of the packets
without being fragmented. Valid range is 0-65535.
num
(4,0)
SETUP_PRIORITY
The setup priority of the tunnel. Valid range is 0-7.
num
(1,0)
HOLD_PRIORITY
The holding priority of the tunnel. Valid range between
0-7.
num
(1,0)
IS_RECORD_ROUTES
Specifies whether the route is actually recorded route
or not. Not Recorded-0 and Recorded-1.
num
(1,0)
TABLE 296
MPLS_RSVP_LSP_FRR_PARAMETERS (Continued)
Field
Definition
Format
Size