Sony Multi Interface Shoe Adapter - Manual (Page 993)

993
Interfacing With External Devices (Device Interface Menu)
Cha
p
te
r 20
Swi
tc
h
e
r S
e
tup (Swit
c
her
)
Select the signal input to the DME (AUX bus output) and the signal returned
as the switcher primary input (reentry input) as follows.
1
In the Switcher >Device Interface menu, press [DME SDI Interface].
The DME SDI Interface menu appears.
2
Using any of the following methods, select the DME channel to which
operations apply.
• Press directly on the list on the left of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Note
When using the MVE-8000A, it is not possible to select any of DME 5 Ext
In to DME 8 Ext In.
3
In the group, select the AUX bus or reentry to be assigned to the
DME channel.Aux Bus: Set AUX bus.Re-Entry: Set reentry.4Depending on the selection in step 2, use any of the following methods to make the setting.• Press directly on the list on the right of the status area.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.• When Aux Bus is selected•When Re-Entry is selectedKnobParameterAdjustmentSetting values1DME Ch NoDME channel selection1 to 24KnobParameterAdjustmentSetting values2Src NoAUX bus number0 to 48KnobParameterAdjustmentSetting values2Src NoReentry number0 to 49 Pages: 1 … 991 992 993 994 995 … 1094 wrong Brand wrong Model non readable See also other documents in the category Sony Flashlights: HVL-F42AM (263 pages) HVL-F58AM (88 pages) HVL-MT24AM (295 pages) HVL-MT24AM (293 pages) HVL-MT24AM (294 pages) HVL-F20S (30 pages) 4-105-930-12(1) (88 pages) HVL-F43AM (76 pages) HVL-F1000 (2 pages) HVL-F20S (2 pages) HVL-FH1100 (2 pages) HVL-FDH4 (2 pages) HVL-RLA (2 pages) HVL-F32X (88 pages) 4-183-746-11(1) (88 pages) HVL-F36AM (212 pages) HVL-FSL1 (2 pages) HVL-FSL1A (2 pages) HVL-FDH3 (2 pages) HVL-F20M External Flash (33 pages) HVL-F28RM External Flash (2 pages) HVL-F46RM Wireless Radio Flash (2 pages) HVL-F46RM Wireless Radio Flash (2 pages) HVL-LE1 Handycam Camcorder Light (2 pages) Multi Interface Shoe Adapter (21 pages) FA-WRR1 Wireless Radio Receiver (2 pages) FA-WRC1M Wireless Radio Commander (81 pages) Sitemap
Aux Bus: Set AUX bus.
Re-Entry: Set reentry.
4
Depending on the selection in step 2 , use any of the following methods to
make the setting.
• Press directly on the list on the right of the status area.
• Press directly on the list on the right of the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
• When Aux Bus is selected
• When Re-Entry is selected
Knob Parameter Adjustment Setting values
1 DME Ch No DME channel selection 1 to 24
Knob Parameter Adjustment Setting values
2 Src No AUX bus number 0 to 48
Knob Parameter Adjustment Setting values
2 Src No Reentry number 0 to 49