Sony Multi Interface Shoe Adapter - Manual (Page 331)

331
Misc Menu Operations
Chapt
er
8
Co
lor Ba
c
k
g
ro
und
s
, Cop
y
a
nd Sw
ap
, an
d Ot
her
S
e
tt
ing
s
3
Press [Safe Title] to set it on or off.
Displaying a List of Transition Rates and Changing the
Settings
In the Transition menu, for each bank you can display a list of the M/E (or
PGM/PST) transition rates and independent key (or DSK) transition rates, and
change the settings.
These settings are linked to the other transition rate setting operations.
Displaying the Transition menu
In the menu control block, press the top menu selection button [MISC], then
select VF3 ‘Transition.’
The Misc >Transition menu appears.
About the Transition menu display
The display of the independent key transition rate in the Misc >Transition
menu depends on the selection in the group of the
Engineering Setup >Switcher >Transition menu for each of the M/E and PGM/
PST banks.
When [Same] (On direction and Off direction settings the same) is selected
in the group: Only “Key” (or “DSK” in the PGM/PST
bank) appears.
When [Independ] (On direction and Off direction settings independent) is
selected in the group: “Key(On)” and “Key(Off)”
each appear. In the case of the PGM/PST bank, “DSK(On)” and
“DSK(Off)” appear.
For more details, see “Settings Relating to Video Switching (Transition
Menu)” in Chapter 20 (Volume 3).
Setting the transition rate in the Transition menu
For example, to make the settings for the M/E-1 bank, use the following
procedure.
To set the M/E transition rate
1
In the group of the Misc >Transition menu, press
[Transition].
2
Turn the knob to set the number of frames.