Selecting the freeze timing, Applying stardust to the afterimage portion – Sony Multi Interface Shoe Adapter User Manual
Page 542

Cha
542
DME Special Effect Operations
Over:
the movie is on top, and the still image is underneath.
Under:
the movie is underneath, and the still image is on top.
Mix:
the movie and still images are mixed; adjust the following parameter with
the knob.
a) The 0.00 setting is the same as Over, and the 100.00 is the same as Under.
Selecting the freeze timing
In the
strobe.
Frame:
freeze in frame units.
Field:
freeze in field units.
Note
The freeze timing setting is not required when the following signal formats are
being used.
Signal formats: 720P/59.94, 720P/50
Erasing the afterimages that remain in memory whenever a
keyframe is passed
Press [KF Strobe Eraser], turning it on.
When the effect passes a keyframe, the afterimage is erased before writing a
new afterimage.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
Press the [DUST] button, turning it on.
2
Set the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Mix
Mix amount of the still image with
respect to the movie
0.00 to 100.00
a)
Knob
Parameter
Adjustment
Setting values
1
KF Strobe
Dust
Amount of the afterimage
disappearing as stardust
a)
0.00 to 100.00
2
Dust Soft
Timing with which stardust
disappears
0.00 to 100.00
3
Dust Size
Size of stardust
0.00 to 100.00
4
Dust Aspect
Aspect ratio of stardust
–100.00 to +100.00