Sony Multi Interface Shoe Adapter User Manual
Page 68
68
Names and Functions of Parts of the Control Panel
Ch
apt
Device Control Block (MKS-8031TB Trackball Module,
Option)
The device control block is used for three-
dimensional transform operations using a
DME, for wipe pattern position setting, and
for VTR/disk recorder or frame memory
clip operations.
a
Region selection buttons
The operation mode allocated to the device
control block depends on the selection state
of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and
[P/P] buttons are selected:
This
enables the wipe pattern position
setting (positioner) operation mode in
the device control block. You can
select multiple buttons simultaneously.
When the MKS-9011 1M/E Control
Panel is used, only the [P/P] is enabled.
When the MKS-9012 2M/E Control
Panel is used, only the [M/E-1] and [P/
P] are enabled.
When the [USER] button is selected:
This
enables pattern position setting used
for color backgrounds.
When the [DME1], [DME2], and
[DME5] to [DME 8] buttons are
selected:
This enables the three-
dimensional transform operation mode
in the device control block.
Press a button, turning it on, to select a
DME channel. You can select multiple
buttons simultaneously.
1
Region selection buttons
3
Trackball
4
Z-ring
2
Operating buttons
5
MENU button