Setting the format converter outputs – Sony Multi Interface Shoe Adapter User Manual
Page 970
Chapt
970
Signal Output Settings (Output Menu)
Cropping the image to a 4:3 aspect ratio in an HD system
In an HD system, to crop an image having a screen aspect ratio of 4:3 to an
aspect ratio of 4:3, use the following procedure.
1
In the Switcher >Output menu, press [4:3 Crop].
The 4:3 Crop menu appears.
The status area shows the output ports and respective 4:3 Crop mode
settings.
2
Press [4:3 Crop], turning it on.
This enables the crop setting, and this is reflected in the status area.
Note
When the screen aspect ratio of 16:9 is selected for all M/E banks in the System
>Format >Active Line/Aspect menu, the setting of 4:3 Crop is disabled.
Setting the format converter outputs
To set the format converter
Display the Switcher >Output >FC Adjust menu. The subsequent operations
are the same as for the format converter input settings, except that you can not
disable the format converter settings.
For details of the operations, see “Setting the Format Converter Inputs” (page
960).
To copy format converter output data
1
In the Switcher >Output >FC Adjust menu, press [Copy].
The Copy/Swap >Copy >Format Converter menu appears.
2
In the group, press [Output].
3
Use the same operations as in steps
3
and
4
of
to copy the data.