Motion decay settings, Blurring image motion – Sony Multi Interface Shoe Adapter User Manual
Page 539

539
DME Special Effect Operations
Chapt
Notes
• The combine process function is possible using a second DME.
• The combine process function is not supported on the MVE-8000A and
MKS-6470.
• When you change the selection in the
afterimages which had been added up to then disappear.
• When you do not combine images, the Trail effect only is applied, regardless
of the selection in the
Select one of the following in the
Combine –> Trail:
Add the Trail effect after the combine. As the trail
parameters, the data for the channel with the lowest number among the
channels being combined is enabled.
Trail –> Combine:
Add the Trail effect before the combine. Trails parameters
can be set independently for each channel.
Motion Decay Settings
Note
When you turn on motion decay, if the Drop Shadow, Trail, Keyframe Strobe
or Wind effect is on, it automatically goes off.
Blurring image motion
1
In the DME menu, select VF5 ‘Light/Trail’ and HF3 ‘Motion Decay.’
The Motion Decay menu appears.
2
Press [Motion Decay], turning it on.
Combine –> Trail
Trail –> Combine