Sony Multi Interface Shoe Adapter User Manual
Page 554

Cha
554
DME Special Effect Operations
Parameters when you selected Non Linear
a) Light appears from Z direction. At –100.00 the light goes deepest, at +100.00 the whole
image is lit like a flat effect.
6
If you selected Texture in step
4
, select the pattern as explained in the next
section “To select a texture pattern.”
7
If you selected Texture in step
4
, select the way it is applied in the Axis> group. Move: The texture moves together with the DME image. Fix: The texture does not move, even if the DME image moves. For the difference between these application methods, see “Coordinate Note If Non Linear is selected in the To select a texture pattern 1 In the Spot Lighting menu, press [Texture Ptn Select]. The Texture Ptn Select menu appears. 2 In the [User]: List of texture patterns created by the user. ( See “Adding User Texture Patterns” in Chapter 18 (Volume 3) . [Factory]: List of texture patterns stored in the system when shipped from the factory. 3 Do one of the following to select a texture. • Press directly on the list on the right of the status area. Knob Parameter Adjustment Setting values 5 Amp Distance of light –100.00 to +100.00 a)
axis on surface of image” (page 546).
Behavior is the same as Move.
Two lists appear in the status area. The list on the left displays the number
and name of the currently selected texture. The list on the right is for
selecting a texture.
texture pattern list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.