Sony Multi Interface Shoe Adapter User Manual
Page 1075
1075
Error Messages
Ap
pen
Error
This operation is cancelled,
because the register is locked.
Please change the register
status to be unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store/Recall >Edit
In the above menu, an attempt was made to
assign to a register that is locked. Unlock the
register before carrying out the assignment.
The file was not able to be
read.
7142.1: File >Shotbox, Macro >File Edit
In the above menu, [Off Line Edit] was pressed
but the selected file could not be read.
Select the file again, and press [Off Line Edit]
once more.
It was not possible to make a
file.
7142.3: File >Shotbox, Macro >File Edit >Off
Line Edit
In the above menu, when storing, the file could
not be written.
Try the store once more.
Failed...
7162: File >All, External File >Import/Export
In the above menu, importing a file failed.
Check the format of the original file, and try
again.
The Source and the target are
the same directory.
Please change the source or
the target directory.
7172: File >Configure >Unit ID Copy
In the above menu, the same directory and ID
were selected for source and target.
Select a different directory and ID.
File Frame
Memory
Some requests are skipped.
Following operation is not
permitted.
— Loading that will cause
duplicate register name.
7151: File >Frame Memory
7162: File >All, External File >Import/Export
In the above menu, an attempt was made to
load a file of a name already existing in the
register.
File Open
Status
ERROR (01)
533X: Device >DDR/VTR menu
When an error is returned from the DDR/VTR,
one of these messages appears, depending on
the error number.
Use Menu7355:Engineering Setup >DCU
>Serial Port Assign or
Menu7325.4:Engineering Setup >Panel
>Device Interface >Serial Port Assign to check
the device settings.
ERROR (02)
ERROR (FF): No target device
has been assigned
Format
Success!!
2561: Frame Memory >External HDD >Format
In the above menu, formatting the external hard
disk completed successfully.
Icon Title
Message
Description