Sony Multi Interface Shoe Adapter - Manual (Page 479)

479
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Color Mix Settings
Note
The color mix function is not supported on the MVE-8000A and MKS-6470.
Creating a color combination pattern
To select the pattern
1
In the DME menu, select VF1 ‘Edge’ and HF7 ‘Color Mix.’
The Color Mix menu appears.
2
Press [Mix Pattern Select].
The Mix Pattern Select menu appears.
3
Press any of the displayed patterns (standard wipe patterns 1 to 24) to
select it.
In this state, you can adjust the pattern size and border softness with the
knobs.
(For details of the parameters, see the next item.)
To set the pattern size and position
1
In the Color Mix menu, press [Position/Size].
2
Set the following parameters.
The setting range for the parameters depends on the system selected signal
format (SD/HD) and aspect ratio (4:3/16:9), as follows.
• For SD format
a) For 4:3 mode
b) For 16:9 mode
Knob Parameter Adjustment Setting values
1 H Horizontal position –8.00 to +8.00
2 V Vertical position
–6.00 to +6.00
a)
–4.50 to +4.50 b)
3 Size Pattern size 0.00 to 100.00
4 Soft Softness of the pattern 0.00 to 100.00
5 Pattern Pattern number 1 to 24