beautypg.com

Setting the assignment of macro operation buttons, Fade-to-black control block – Sony Multi Interface Shoe Adapter User Manual

Page 893

background image

893

Overall Control Panel Settings (Config Menu)

Chap

te

r 1
9

Cont

ro

l P
a

n

e

l

Set

u

p

(

P

a

nel)

The texts on the button displays change to the selected items.

To inhibit the button operations

Press [Clear].

To make the assignment the default

Press [Default].

Setting the Assignment of Macro Operation Buttons

Note

This setting is disabled for the CCP-9000/9000A.

To switch the [UNDO] button on a simple type Flexi Pad control block to a
[MCRO] button for macro operation, use the following procedure.

1

In the Panel >Config >Link/Program Button menu, press [Flexi Pad
Module].

The Flexi Pad Module menu appears.

2

Select the assignment of the [UNDO] button in the simple type Flexi Pad
control block from the group.

UNDO:

use as an [UNDO] button.

MACRO:

use as a [MCRO] button.

Assigning Keys to the DSK1 and DSK2 Buttons in the
Downstream Key/Fade-to-Black Control Block

It is possible to select the key used for downstream key/fade-to-black control
block operations.

Note

This operation cannot be done in the CCP-9000/9000A.

1

In the Panel >Config >Link/Program Button menu, press [DSK/FTB
Module].

The DSK/FTB Module menu appears.
The left side of the status area shows the DSK1 and DSK2 buttons, and the
right side shows a list of keys to be assigned.