Sony Multi Interface Shoe Adapter - Manual (Page 560)

Cha
p
te
r 11
DME
O
per
at
ion
s
560
DME Special Effect Operations
a) For more information about the shape patterns, see “Shape Patterns” (page 809) in the
Appendix.
b) 0 is a round shape, and 100 is the shape itself. Smaller values make the pattern more
rounded.
c) – 1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the
clockwise direction.
To rotate the shape pattern
1
Press [Shape Speed], turning it on.
The display on knob 5 that was visible when [Shape] was selected changes.
2
Set the following parameter.
a) – 100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four
rotations per second in the clockwise direction. 0.00 stops the rotation.
To change the light to a ring shape
Note
If you select Parallel or Whole (see page 556) in the group and
shaping is disabled, the Ring parameter cannot be set.
1
Press [Ring], turning it on.
2
Set the following parameter.
• SD format
a) – 1.00 is one rotation in the counterclockwise direction and +1.00 is one rotation in the
clockwise direction.
Note
There is no Radius setting when Line is selected in the
group.
5 Angle Angle of shape pattern rotation
–8.00 to +8.00
c)
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
5 Speed Rotation direction and speed
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 Offset Offset from center position (radius) –6.00 to +6.00
2 Radius Radius of ring 0.00 to 6.00
3 Angle Rotation angle of ring
–8.00 to +8.00
a)