Displaying the macro attachment list – Sony Multi Interface Shoe Adapter User Manual
Page 758
758
Macro Attachment Assigning
Ch
fader lever position where the macro attachment is set appears in the following
places.
•
Transition indicator in the transition execution section:
The indicator
lights at the position where the macro attachment is set.
•
Transition rate indication in the transition execution section:
This shows
the fader lever position where the macro attachment is set, as a percentage
value. (Fader lever start position as 0%, end position 100%)
Removing macro attachment settings
To cancel a macro attachment to a button
Hold down the [PRE MCRO] or [POST MCRO] button assigned to a utility/
shotbox control block button or user preference button, and press the
background A row button that is flashing. The button for which a macro
attachment was set stops flashing and goes off, and the setting is canceled.
To cancel a macro attachment to a fader lever
Hold down the [PRE MCRO] or [POST MCRO] button assigned to a utility/
shotbox control block or user preference button, and press the [LIMIT SET] or
[PRIOR SET] button in the control block containing the fader lever having the
macro attachment set.
To remove all macro attachment settings in a single operation
You can remove all macro attachment settings in a single operation.
1
In the Macro menu, select VF2 ‘Attachment.’
2
Press [All Clear].
A confirmation message appears.
3
Select [Yes].
This deletes all macro attachment setting data.
Displaying the Macro Attachment List
In the Macro >Attachment menu, you can display the macro attachment list to
check the macro attachment settings.
The macro attachment list includes the following columns.
•
Block:
Shows the names of control panel blocks.
•
Button:
Shows the names of macro attachment assigned buttons (of up to 30
characters).