Sony Multi Interface Shoe Adapter - Manual (Page 796)

Chapt
er
1
7
F
iles
796
File Batch Operations
3
Press [ t Save].
A confirmation message appears.
• Select “Yes” to carry out the batch save.
• Select “No” to cancel the batch save.
Batch Loading Files
To load files from hard disk or memory card, use the following procedure.
1
In the device selection area of the All menu, select where the files are held
([HDD] or [Memory Card] and directory).
(See page 785.)
2
If there are files you do not want to load, in the group, exclude
them from the operation. To select all files, press [All Select].
For details of the data to which operations apply, see “Files that can be
manipulated” (page 778).
Note
The frame memory is not selected when you press [All Select]. To apply
the setting to frame memory, press [Frame Memory], turning it on. When
frame memory is selected, it is not possible to apply settings to the
group data.
3
Press [ T Load].
A confirmation message appears.
• Select “Yes” to carry out the batch load. (Setup data is first loaded.)
• Select “No” to cancel the batch load.
To execute the load after clearing the data in the destination
regions
Before pressing [ T Load], press [CLR Before Load], turning it on.
The following categories of data can be cleared before execution of the load.
Effect, Snapshot, Wipe Snapshot, DME Wipe Snapshot, Key Snapshot,
Shotbox, and Macro
Note
When frame memory is selected for the setting, the data is always deleted
before recalling.