beautypg.com

Sony HVL-F28RM External Flash User Manual

Battery station, Before using this product, Included items

background image

LBN-H1.US.5-048-993-11(1)

Battery Station

5-048-993-

11

(1)

Operating Instructions

LBN-H1

Before using this product

When using a portable power supply,
inverter or generator, ensure that is capable
of supplying more than 1 000 Watts.

Included items

Power cord (1)

Accessory socket cap (3)

Operating Instructions (1)
Warranty (1)

Using the accessory socket cap

The accessory socket cap can be also
used as a stopper to prevent the lid from
accidentally shutting due to wind or other
factors while using this product.

Parts and Controls

Outside of the product

Charging battery packs

1

Slide the MODE switch to CHARGE.

2

Slide the OPTION switch to FULL or
QUICK to select the charging level.

• FULL (Full charge): Charges until the

battery level reaches 100%.

• QUICK (Practical charging): Charges

until the battery level reaches 90%. The
charging time is shorter than FULL.

3

Connect the power cord to the power
port and wall outlet, and then turn on
the power switch.

4

Insert the battery packs to charge into
the battery slots 1 to 4 in order.

Insert firmly until the battery packs click
and lock into place.

5

Confirm that the battery status LED
lights up in orange.

The battery status LED lights up in orange
during charging. The battery level LEDs
on the battery pack indicate the battery
level.

Battery level LEDs

Battery status LEDs

6

Check the charging status of the battery
pack.
While charging, you can check the charge
level with the battery level LEDs on the
battery pack.

Battery level

0%–25%: The LED on the far left blinks.
26%–50%: The 2nd LED from the left

blinks.

51%–75%: The 3rd LED from the left blinks.
76%–99%: The LED on the far right blinks.
Charging complete: All LEDs are off.

7

When charging has completed,
remove the battery pack while
pressing the battery release button.

About the battery charging mechanism

• Battery packs in the battery slots facing up/

down cannot be charged at the same time.
Charging starts from the battery slot into which
the battery pack was inserted first. The other
will be in a standby state, and will start charging
when the battery pack that started charging first
has completed charging.

• Up to 4 battery packs can be charged at the

same time.

• If you turn on the battery station with the battery

packs already inserted into the battery slots,
charging starts from battery slots 1 and 2.

• If the temperature of the battery pack is too

high, such as immediately after flight, charging
will not start due to the protection function. The
battery status LED will repeat blinking fast twice
in orange and the cooling fan will automatically
start. When the battery pack cools down to a
chargeable temperature, charging will start
automatically.

Lid

Lid lock

Wheels

Handle

Retractable handle

Pressure valve

The air pressure inside the Battery Station
is adjusted automatically. Do not touch
the pressure valve.

Inside of the product

Dedicated remote controller charging

cables

Air vent

Power switch

Power port

Storage pocket

Battery storage slot

Accessory sockets

Battery slot (Battery charging/

discharging slot)

Air outlet

Power LED

Battery status LEDs

You can check the charge/discharge status of the battery packs inserted in the battery slots.

LED color

LED indication

Status of the battery pack

Off

Battery pack is not inserted.

Green

Lit up

Charging has completed.

Orange

Lit up

Charging.

Orange

Blinking slowly

Waiting for charging to start. Charging will start when
charging of the battery pack inserted in the battery
slot facing up/down has completed.

Orange

Blinking fast twice

Due to the high temperature of the battery pack, it
cannot be charged.

Orange

Blinking fast three
times

Due to the low temperature of the battery pack, it
cannot be charged.

Blue

Lit up

Discharging has completed.

Purple

Lit up

Discharging.

Purple

Blinking fast twice
repeatedly

Due to the high temperature of the battery pack, it
cannot be discharged.

Red

Blinking slowly

Due to some problem with the battery pack, it cannot
be charged/discharged.

MODE switch

Switches between charging (CHARGE)/
discharging (DISCHARGE) of the battery
packs.

OPTION switch

Sets the charging/discharging level.

• For charging (when the MODE switch is

set to CHARGE): Selects the charging
level (FULL or QUICK).

• For discharging (when the MODE switch

is set to DISCHARGE): Selects the
discharging level (50% or 25%).

ACCESSORY switch

Switches the power supply from the
dedicated remote controller charging
cables and the accessory sockets on and
off.

Battery release button

Remove the battery pack while pressing
the battery release button.

Continued on the reverse side