Restrictions when using wipes, Restrictions when using dme wipes, Restrictions on utility buses – Sony Multi Interface Shoe Adapter User Manual

Page 368

368

Simple P/P Software

Chapt

• A processed key cannot be used. Therefore, it is not possible to apply a DME

effect to a downstream key.

• As an independent key transition type, wipe and DME wipe cannot be used.
• The resizer cannot be used.
• The key frame delay mode cannot be used.

Restrictions on executing transitions in the transition control
block

• Wipes can be used, but there are restrictions on use.

For details, see the next

item, “Restrictions when using wipes.”

• You can use a DME wipe for a background transition only.

For details, see

Restrictions when using wipes

• The wipe patterns that can be used are pattern numbers 1 to 24 only.
• When a border or soft border is selected for a wipe edge, the signal to be

inserted in the edge (edge fill) is restricted as follows.
– The utility bus cannot be selected.
– When using a matte, a mix color cannot be used.

Restrictions when using DME wipes

• You can use a DME wipe for a background transition only.
• The patterns that can be selected are as follows. (One-channel patterns only)

Slide/Squeeze:

slide and squeeze

Door:

door

Flip Tumble:

flip tumble

Frame I/O/P in P:

frame in-out, picture-in-picture

Mosaic/Defocus:

mosaic and defocus

Brick:

brick

Notes

• For flip tumble, the background is filled with the same color as the wipe

border matte (single color).

• Door patterns 1045 to 1048 cannot be used.

Restrictions on utility buses

The utility bus cannot be used.