Sony Multi Interface Shoe Adapter User Manual

Page 566

Cha

566

DME Special Effect Operations

When multiple effects are applied, the order of priority is (a) > (b) > (c).
The following explains the relationship between effects and states (a), (b), and
(c).

(a) The output video signal is affected by the key signal

The output video signal is affected by the key signal when the following effects
are selected. To prevent the signal from being affected, set the DME key source
to Int Key, or choose an appropriate input key signal.

Page Turn, Roll, Cylinder, Sphere, Spotlighting, global effects (Combiner,
Brick, Shadow)

(b) When key processing is done, a different image may appear in
the parts which are removed

The following states result, depending on the selected effect.
Removal with the key can be checked by turning the background on.

Border, Beveled Edge:

Added also to the outer side of the cropped video

signal (restriction of this version only).

Trail, Keyframe Strobe:

The key signal level of the afterimage portion varies

with adjustments of the knob (Decay), but the afterimage portion of the
video signal does not disappear until Trail Eraser (KF Strobe Eraser) is
turned on or the effect is turned off.

Lighting:

The Lighting effect is applied to the whole picture.

Spotlighting:

If BKGD or Both is selected in the group, light

strikes the entire background.

The following states result, depending on the selected effect.
Removal with the key can be checked by turning the background on.

Crop:

The Copy effect is applied to the key signal only. The video signal does

not change.

Edge Soft:

The Edge Soft effect is applied to the key signal only. The video

signal does not change.

Shadow, Flex Shadow, Combine Shadow:

The key signal density changes.

The video signal does not change.

Fade:

The key signal changes according to depth data. The video signal does

not change.

Key Density:

The key signal density changes. The video signal does not

change.