Separate sides settings, Shaped video settings, Separate sides settings shaped video settings – Sony Multi Interface Shoe Adapter User Manual
Page 564: Applying the separate sides effect

Cha
564
DME Special Effect Operations
Notes
• “Mix Color”or “Ext Video” can only be applied to one of the
background, flex shadow
, and wind
effects.
If you select “Mix Color” or “Ext Video” in one of these settings, a
selection of “Mix Color” or “Ext Video” in any of the other effects is
disabled, and “Flat Color” is selected in its place.
• When executing combining four channels of DME images, “Mix Color”
and “Ext Video” cannot be selected.
2
Only if Flat Color is selected in step
1
, adjust the following parameters.
Separate Sides Settings
Applies separate video signals and key signals to the front and back of the
image.
Applying the Separate Sides effect
1
In the DME menu, select VF6 ‘Input/Output’ and HF2 ‘Video/Key.’
The Video/Key menu appears.
2
Press [Separate Side], turning it on.
The Separate Sides effect is enabled. If the video and key signals currently
being output to the monitor are the front side, you can select the front
signals. If they are the back side, you can select the back signals. Video and
key signals are selected with the cross-point control blocks of each M/E
bank or the PGM/PST bank.
Shaped Video Settings
For each of the front and back sides of the image, specifies whether to handle
input video from the switcher as shaped video (key processed signals).
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00