Sony Multi Interface Shoe Adapter - Manual (Page 308)

308
Clip Transition Operations
Chapt
er
7
F
rame
Memo
ry
• Turn knob 1 to set the number of frames. (The left end of the reference
axis (see following figure) is the position of frame 0.)
8
Using either of the following methods, set the end point of the background
transition.
• Move the fader lever to the desired position, and in the
Transition Set Timing> group press [Stop].
• Turn knob 2 to set the number of frames.
9
If Wipe or DME Wipe is selected in the group,
in the group, select the background
transition direction.
10
In the group, press [FM 1&2 Clip].11Using either of the following methods, set the start point of the clip.• Move the fader lever to the desired start point, and in the Transition SetTiming> group press [Start].• Turn knob 1 to set the number of frames. (The left end of the reference axis (see following figure) is the position of frame 0.)NoteIt is not possible to set the end point.12In the group, select the playback direction of the clip.To reset the start point and end pointPress [Timing Reset].
The background transition start point and end point, and the clip start point are
all reset.Position of frame 0Reference axis Pages: 1 … 306 307 308 309 310 … 1094 wrong Brand wrong Model non readable See also other documents in the category Sony Flashlights: HVL-F42AM (263 pages) HVL-F58AM (88 pages) HVL-MT24AM (294 pages) HVL-F20S (30 pages) HVL-MT24AM (295 pages) HVL-MT24AM (293 pages) 4-105-930-12(1) (88 pages) HVL-F43AM (76 pages) HVL-F1000 (2 pages) HVL-F20S (2 pages) HVL-FH1100 (2 pages) HVL-FDH4 (2 pages) HVL-RLA (2 pages) HVL-F32X (88 pages) 4-183-746-11(1) (88 pages) HVL-F36AM (212 pages) HVL-FSL1 (2 pages) HVL-FSL1A (2 pages) HVL-FDH3 (2 pages) HVL-F20M External Flash (33 pages) HVL-F28RM External Flash (2 pages) HVL-F46RM Wireless Radio Flash (2 pages) HVL-F46RM Wireless Radio Flash (2 pages) HVL-LE1 Handycam Camcorder Light (2 pages) Multi Interface Shoe Adapter (21 pages) FA-WRR1 Wireless Radio Receiver (2 pages) FA-WRC1M Wireless Radio Commander (81 pages) Sitemap
11
Using either of the following methods, set the start point of the clip.
• Move the fader lever to the desired start point, and in the
Transition SetTiming> group press [Start].
• Turn knob 1 to set the number of frames. (The left end of the reference
axis (see following figure) is the position of frame 0.)
Note
It is not possible to set the end point.
12
In the group, select the playback direction of
the clip.
To reset the start point and end point
Press [Timing Reset].
The background transition start point and end point, and the clip start point are
all reset.
Position of frame 0 Reference axis