Sony Multi Interface Shoe Adapter - Manual (Page 947)

947
Screen Saver and Other Settings (Maintenance Menu)
Chap
te
r 1
9
Cont
ro
l P
a
n
e
l
Set
u
p
(
P
a
nel)
LED: Adjust the brightness of the LED displays in the numeric keypad control
block and so forth.
Switch: Adjust the brightness of the panel switches.
The following description takes the LCD brightness as an example. Use a
similar process for the other adjustments.
1
In the Panel >Maintenance menu, press [LCD Brightness].
2
Adjust the following parameter.
a) The larger the value, the brighter the screen.
Adjusting the Alarms
In the Panel >Maintenance menu, make the following settings.
To give audible feedback from menu touch screen operations: Press
[Touch Beep], turning it on.
Calibrating the Touch Panel
1
In the Panel >Maintenance menu, press [Touch Panel Calibration].
The following message appears.
“To Perform Calibration, please touch the center of each plus sign.”
2
Press [Yes].
3
Press the center of the plus sign displayed on the screen.
When you press on the plus sign, it disappears and a diagonally opposite
plus sign appears.
4
Press the center of the plus sign.
A confirmation message appears.
• Select “Yes” to restart the panel reflecting the new setting.
• Select “No” to cancel the setting and return to the Maintenance menu.
Knob Parameter Adjustment Setting values
1 Brightness Menu screen brightness
1 to 5
a)