Sony Multi Interface Shoe Adapter - Manual (Page 1045)

1045
Serial Tally Settings (Serial Tally Menu)
Chap
te
r
2
3
Se
tup
Re
lat
ing t
o
Rout
er I
n
te
rf
a
c
e
a
nd T
a
lly
(Ro
u
te
r/
T
a
lly
)
Serial Tally Settings (Serial Tally Menu)
To make serial tally settings, display the Router/Tally >Serial Tally menu.
Make the serial tally settings, including tally type and source address for each
serial tally port.
To display the Serial Tally menu
In the Engineering Setup menu, select VF6 ‘Router/Tally’ and HF7 ‘Serial
Tally.’
The serial tally settings appear in the status area.
Setting or Changing the Serial Tally Settings
1
In the group of the Router/Tally >Serial Tally menu,
select the port to which the setting applies.
2
In the group, select the tally group.
3
In the group, press the tally types to select. (You can select
up to four.)
Note
The selectable tally types depend on the settings in step 2 .
Making the Serial Tally Source Address Settings
To set the serial tally source address for each port, use the following procedure.
1
In the Router/Tally >Serial Tally menu, press [Source Assign].
The Source Assign menu appears.
In the status area, the tally types and source address set for the serial tally
port appear.
2
In the group, select the port to which the setting
applies.
3
Using any of the following methods, select the port bit number.