Sony Multi Interface Shoe Adapter - Manual (Page 327)

327
Copy and Swap Operations
Chapt
er
8
Co
lor Ba
c
k
g
ro
und
s
, Cop
y
a
nd Sw
ap
, an
d Ot
her
S
e
tt
ing
s
3
Using any of the following methods, select the data to be copied or
swapped.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
a) Transition control block wipe data
b) Independent key transition control block wipe data
For details of the data affected, see “Copy and Swap” (page 322).
4
To copy, press [Copy], and to swap, press [Swap].
This carries out the copy or swap.
To undo a copy or swap
Press [Undo], to return to the state before the copy or swap was carried out.
Copy by Button Operation
You can copy key data by a simple button operation.
Basic button operation
The basic button operation is to hold down the copy source button, then press
the destination button.
You can undo the last operation using [Undo] in the menu
(see page 327).
Keyer copy button operation
Use the key delegation buttons in the respective banks.
To copy from M/E-1 key 1 to P/P downstream key 2
Hold down the M/E-1 key delegation button [KEY1] and press the P/P key
delegation button [DSK2].
Knob Parameter Adjustment Setting values
1 Left No Select data for copy/swap
source
1 to 4
a)
1 to 16
b)
2 Right No Select data for copy/swap
destination
1 to 4
a)
1 to 16
b)